🧼 Dipping Bowl Cleaning Guide

Last updated March 30, 2026

As always, please refer to the latest version of the Stardust Operational Manual for the most up to date information

Pour and brush kief from the Dipping Bowl into a storage container.
From the bottom of the Dipping Bowl, use the blow gun to blow out entrapped material.
Immerse the bottom of the Dipping Bowl in a shallow pan of IPA. Agitate to remove entrapped material.
Repeat as necessary with clean IPA.
Wipe the remaining portions of the bowl with IPA and microfiber cloths.
Oven dry at 35°C for 4hrs minimum or until dry.
Do NOT rest the Dipping Bowl directly on the oven floor.
Do NOT overheat the Dipping Bowl.
Use a bright light from the bottom of the Dipping Bowl to inspect the pores, which should look clean and let light through.
Re-lubricate the Dipping Bowl o-rings with food safe grease.
Re-install the Dipping Bowl by aligning the tab to its base, and press down firmly to seat.

This procedure is listed in the Cleaning Schedule section of the Stardust Operational Manual.
The pore inspection step is important: the pores should appear clean and allow light through before reinstalling the bowl.

Was this article helpful?